cornering force的例句大全

The side slip angle, cornering force, aligning torque and cornering potential energy of the pneumatic tires were deduced. And the spring deformation energy and damping-force potential energy of the wheel-rail radial contact were also deduced. 4.

推导了充气轮胎的侧偏角、侧偏力、回正力矩和侧偏势能，也推导出了承重轮、导向轮的轮轨接触弹簧变形能和粘性阻尼力势能。

The model of the aluminum alloy wheel classified as 16 x 6.57 is built. Static stress analysis is carried out to study the influence of bolt pre-tension, centrifugal force and the cornering force to the structural as well as the distributing rule of stress and strain.

首先根据试验工况建立起16×6.5J车轮的有限元模型，通过静力分析研究螺栓预紧力、旋转离心力和试验弯矩对车轮结构强度的影响以及车轮结构的应力应变分布规律。

In this paper a new concept on cornering force of toe-in was put forward.

同时，提出了前束侧偏力概念供商讨。

Three axle vehicle; Vehicle dynamics; Response; Steering character; Cornering force;

三轴汽车；汽车动力学；响应；转向特性；侧偏力；

Thirdly, the impact of the cornering force of each wheel on direction instability due to load transfer combined with characteristics of tires is also studied.

及通过载荷转移结合轮胎特性所导致的各个车轮上的侧偏力大小对汽车行驶方向失稳影响的研究；

Finally, according to tire models, Magic Formula is applied to establish the correlation between the lateral angle and the cornering force as well as a handling dynamics model.

根据轮胎模型应用魔术公式建立侧偏角与侧偏力的对应关系并建立爆胎汽车的操纵动力学模型。

Different models' responses to various steering conditions, including velocity, front-wheel corner and friction coefficient of road surface, are analyzed, which explain that the tire nonlinearity between slip angle and cornering force have effects on the simulation results.

针对不同的使用参数，包括车速、前轮转角和路面摩擦系数，对不同模型的仿真结果进行比较分析，说明了轮胎的侧偏角和侧偏力之间存在的非线性关系对仿真结果的影响。

Appling brake force when vehicle in cornering is a complicated and dangerous situation.

车辆在转弯制动过程中同时施加制动,是一种复杂且危险的工况.